6/22/2023 0 Comments Cisco tftp clientI’m trying to build a Raspberry Pi zero TFTP server (with USB Ethernet dongle) and I have followed your tutorial as well as several others but my Windows 10 machines cannot seem to download files from the Pi for testing. Please note different models of gear work slightly differently on crypto and write mem, so do your own experimenting to figure out what works.Īnd here is the documentation links I used to get this up and running. Below is a screenshot of a device that has gone through this process. The switch ports still go though STP so even after it’s fully booting it has to go though work to get working. Next comes the waiting, give it a few minutes. Next plug the Ethernet into a device with no startup config, and start the device. Move the Micro SD card to the Pi and start the Pi. First let’s take a backup of a config and save it to our micro SD card under the tftp folder as “ network-confg”. This finishes up the configuration portion of the work, now let’s try it out. This is the only thing I did though the GUI, just go up to the network area in the top right of the screen right click and tell it you want eth0’s IP to be 192.168.1.254 with a subnet mask of 255.255.255.0, or there are a million other tutorals on how to set a static IP. So let’s go ahead and make that folder in the boot directory. You may be wondering “Why would you put them into the boot folder?” The answer is: because when the tech plugs the card into his windows machine that is the folder he’ll see. ![]() The “server_args = /boot/tftp“ is where you will put the config files. Option voip-tftp-server code 150=ip-address Next just add this to the bottom of the config file: Now we need to edit the DHCP config to give it an IP range, and enable option 150 where we will put in the IP address that we will use for the Pi later on (192.168.1.254). Let’s go ahead and upgrade and update the Pi: Most everything will be done on the CLI for this document, just SSH in (default account is Username = pi, Password = raspberry). For those of you running Linux I am sure you know Linux better than I do, so have at it. Here is the link for how to install it for those of you with Windows. I did the desktop version as I am not great at Linux. This document should walk you through setting up a Pi to apply a configuration to your Cisco gear.įirst you need to download the OS. I didn’t want to use their laptop–as installing a DHCP server on a non-technical persons laptop is just asking for trouble–and I wanted it to be affordable. So all we need to make it so anyone can configure the Cisco gear is a server running DHCP and TFTP that anyone can use. If the device finds this file it will then import the config. It will then ask for several named files–I am going to use “network-confg” for this document. Long story short, when a device (router/switch) first starts up it tries to get an IP address through DHCP, if that DHCP server has the TFTP (150) option set the device will reach out to the IP listed. Here is a quick link if you want more info. I wondered if there was a better way so that only the tech needed to be involved.Ĭome to find out when an unconfigured Cisco device is first started it will go turn on the auto-install feature. At work we have many routers and switches, and we have highly skilled people who spend a lot of time configuring replacement devices often through a technician’s laptop who is on-site.
0 Comments
Leave a Reply. |